Not all wooden hangboards are created equal. Some are made from glued-offcuts that snap under bodyweight. Others give you the same four edges and call it a day.
Two Stones took a different approach with their latest hangboard. It’s designed by climbers, cut from a single block of hardwood, and comes with two features you rarely see at this price point: crack holds and adjustable pocket depth using rubber plates.
Let’s break down exactly what you’re getting.
---
Designed by Rock Climbers – With Cracks
This board includes all the standard hold types you’d expect:
· Jugs – Recovery and warm-up
· Slopes – Open-hand strength
· Pockets (2, 3, and 4-finger positions)
· Edges – Various depths for half and full crimps
· Pinches – Thumb and grip work
But the standout addition is cracks. Yes, actual crack-climbing simulations on a hang board. For climbers training for offwidths, hand cracks, or finger cracks, this lets you practice jamming technique and forearm endurance without leaving your doorway.
You also get:
· Phone holder – Timed hangs, form checks, or watching beta videos
· Band holder – Attach resistance bands for pull-up assist or shoulder rehab
It’s a board that serves boulderers, sport climbers, and trad climbers alike.
---
Made from Solid Wood – No Chips, No Splicing
Here’s where many budget boards fail: they’re made from finger-jointed or laminated wood blocks. Those glued seams create weak points. Under heavy loading (especially on small edges or dynamic moves), a splice plate can snap.
Two Stones built this board from a complete, hard solid wood block. No chips glued together. No hidden seams. No splicing.
What does that mean for you?
· Consistent density across every hold
· No unexpected breakage during max hangs
· Better longevity – won’t delaminate or crack along glue lines
If you weigh over 80kg or train with added weight, this matters. A spliced board might feel fine for a month. Then it fails. Solid wood removes that risk.
---
Polished Surface – R5 Fillets on Every Edge
Sharp edges destroy skin and discourage repeat training. Two Stones uses the same finish as their previous board:
· R5 fillet (5mm radius) on every external edge – no sharp 90-degree corners digging into your fingers
· Fabric disc polishing on all surfaces – smooth but not slippery
· Hand-sanded pocket interiors – no rough splinters inside two-finger pockets
You can hang for multiple sets without tearing calluses. It’s a detail that separates climbing-designed boards from generic fitness products.
---
Easy Install – Doorway Ready
Two Stones includes everything you need to mount this directly to a wooden doorframe or wall stud:
· 7 screws total
· 4 PCS of M4×70mm
· 3 PCS of M4×50mm
· 7 expansion tubes
No pull-up bar required. This board mounts flush against a doorway header or a wooden beam. The longer screws give you flexibility for different framing depths. Installation takes about 15 minutes with a drill.
Note: Unlike the previous Two Stones model, this one does not attach to a pull-up bar. It’s designed for permanent mounting. Make sure you have permission to drill if you’re renting.
---
★ Bonus Included – Adjustable Pocket Difficulty
This is the feature that makes the board unique.
You get 3 pairs of rubber plates in different lengths. Slide them into the pockets to instantly change the depth.
Why this matters:
A standard 2-finger pocket might be too deep for a beginner (tempting to over-grip) or too shallow for advanced training (not enough challenge). With the rubber plates, you can:
· Add plates → Make the pocket shallower → Harder hold
· Remove plates → Make the pocket deeper → Easier hold
You can fine-tune each pocket (2-finger, 3-finger, 4-finger) independently. Progress from deep open-hand pockets to shallow crimp pockets over weeks of training. Swap plates between sessions based on how your fingers feel.
No other board at this price gives you that level of adjustability without buying separate inserts.
---
Who Is This Board For?
· Trad climbers who want crack-specific training at home
· Intermediate to advanced climbers (V4–V11) needing small edge increments
· Home gym owners who want a single board that does everything
· Injured climbers rehabbing fingers – adjust pocket depth to gradually increase load
· Coaches training multiple athletes with different finger strength levels
---
What It Doesn’t Have
No pull-up bar compatibility. No “no-drill” option. This board requires screws into wood. If you can’t drill into your doorframe, look at Two Stones’ other model (the pull-up bar version).
Also, crack holds on a climbing hangboard are not a replacement for real crack climbing. They build forearm endurance and basic jamming form, but you still need to get on real rock. Consider them supplemental training.
---
Installation Tips
1. Find a wooden doorframe header (not hollow metal or drywall alone).
2. Use the expansion tubes for drywall-over-wood situations.
3. Mark hole positions with the board held level.
4. Pre-drill to avoid splitting the doorframe.
5. Use the longer 70mm screws if your frame has extra trim thickness.
Tighten evenly. The board should not rock or creak.
---
Final Verdict
The Two Stones Solid Wooden Hangboard solves three common problems:
1. Weak construction → Fixed with single-block hardwood
2. Limited hold variety → Fixed with cracks + adjustable pockets
3. One-size-fits-all pockets → Fixed with 3 pairs of rubber plates
It’s not the cheapest board on the market, but it’s one of the most thoughtfully designed for long-term progression.
If you can drill into a doorframe, want crack training options, and need adjustable pocket depths, this is a genuine value. Just bring your own drill and measure twice before mounting.
Train hard. Keep your fingers safe. And don’t skip crack practice.